Understanding the Splendide® Pump Gasket Seal Kit 116590746G: Function, Replacement Signs, and Proper Installation

Understanding the Splendide® Pump Gasket Seal Kit 116590746G: Function, Replacement Signs, and Proper Installation

If you own an older Splendide washer-dryer combo, such as the WDC1024, SWD1054M, or WDC1025MCEE, you may have noticed that some replacement parts, including the water drain pump, have become obsolete. In such cases, the Splendide® Pump Gasket Seal Kit 116590746G is essential for maintaining your appliance’s functionality. Here’s a closer look at its function, when to replace it, and how to properly install it, while also understanding why this kit is your best option when the drain pump can no longer be replaced.

Function of the Splendide® Pump Gasket Seal Kit 116590746G

The pump gasket seal kit serves several critical functions:

  1. Leak Prevention: The gasket seal prevents water leaks from the pump assembly, which can lead to moisture buildup and potential water damage.

  2. Sealing Connections: It ensures a tight fit between the pump and hose connections, maintaining the integrity of water flow during washing and draining cycles.

  3. Operational Efficiency: A functioning gasket seal allows the pump to operate efficiently, ensuring effective water drainage and smooth washing processes.

Why the Gasket Kit is Your Only Option

For older Splendide models where the water drain pump itself is no longer available for replacement, the gasket seal kit becomes a crucial alternative. Here’s why:

  • Obsolescence of the Drain Pump: As manufacturers phase out parts for older models, the original drain pump may no longer be obtainable. In such cases, maintaining the existing pump through the replacement of the gasket seal is your only option to prevent leaks and ensure proper drainage.

  • Cost-Effectiveness: Replacing the entire pump can be costly, especially when parts are obsolete. The gasket seal kit offers a more affordable solution that can extend the life of your existing pump.

  • Simplified Repair Process: Replacing just the gasket seal is often a simpler and quicker repair than replacing the entire pump. This is particularly beneficial for those who may not have extensive mechanical skills.

When to Replace the Gasket Seal

Recognizing when to replace the gasket seal is crucial for the longevity of your appliance. Here are some signs that indicate a replacement is necessary:

  1. Visible Wear or Damage: Inspect the gasket for cracks, tears, or signs of deterioration. A compromised seal will likely lead to leaks.

  2. Water Leaks: If you notice water pooling around the base of the washer-dryer, it may indicate a failing gasket.

  3. Unusual Noises: Grinding or unusual noises during operation could signal that the pump isn’t functioning correctly due to a poor seal.

  4. Poor Drainage: If your appliance isn’t draining properly, a faulty gasket may be hindering the pump’s ability to remove water effectively.

How to Properly Replace the Gasket Seal

Replacing the Splendide® Pump Gasket Seal Kit 116590746G is a straightforward process, but it requires some basic tools and a bit of mechanical skill. Here’s a step-by-step guide:

Tools and Materials Needed

  • Splendide® Pump Gasket Seal Kit 116590746G
  • Screwdriver set
  • Wrench set
  • Towels or a small bucket (to catch any residual water)
  • Safety gloves

Step-by-Step Instructions

  1. Unplug the Appliance: Ensure the washer-dryer is unplugged to avoid electrical hazards.

  2. Access the Pump: Locate the drain pump, usually found at the bottom of the appliance. You may need to remove a panel or cover.

  3. Drain Water: Use towels or a small bucket to catch any water that may spill when you remove the pump.

  4. Remove the Old Gasket: Carefully detach the pump from the hoses and remove the old gasket seal, cleaning any residue from the pump and hoses.

  5. Install the New Gasket: Position the new gasket seal in place, ensuring a snug fit against the pump.

  6. Reattach the Pump: Carefully reconnect the pump to the hoses, making sure everything is aligned and securely fastened.

  7. Test for Leaks: Plug the appliance back in and run a short cycle to check for leaks. If everything looks good, reassemble any panels or covers you removed.

  8. Final Inspection: After the test cycle, inspect the area around the pump for any signs of leaks. If everything appears secure, your replacement is complete!

Conclusion

The Splendide® Pump Gasket Seal Kit 116590746G is essential for maintaining the efficiency and reliability of older Splendide models, especially when the option to replace the water drain pump is no longer available. By recognizing the signs of wear and following the proper replacement steps, you can ensure that your washer-dryer combo continues to operate smoothly. Regular maintenance will extend the life of your appliance and keep it running at its best. If you have any doubts or encounter issues during the process, consulting a professional may be beneficial to avoid further complications.

Back to blog