Trouble Shooting Pinnacle Washer Dryer Super Combo
The washer-dryer fails to start
Check to make sure the machine is plugged in correctly.
Check the make sure the electricity is working.
Make sure the door is closed properly.
Make sure the start button is pressed.
Make sure the Washer knob is in the correct position for the cycle to start.
Make sure the water supple is turned on.
The washer-dryer fails to fill with water
Make sure the hose is correctly connected to the faucet
Make sure the water is running
Make sure the water pressure is suffient.
Make sure the faucet filter is clean
Make sure the inlet hose is free from kinks and clogging
The washer-dryer continuously fills and drains water
Make sure the drain hose is positioned correctly and not too low.
Check that the inlet hose is not connected at a height more than 40 inches above the floor.
Make sure the end of the outlet hose is not immersed in water.
The washer-dryer does not drain or spin
Make sure the selected program incorporates water draining.
Make sure the drain pump is not kinked or clogged
There are too many suds in the drum
Make sure High Efficiency (HE) detergent is being used.
Make sure you are using the correct amount of detergent.
The washer-dryer vibrates too much during the spin cycle
Make sure all the shipping rods have been removed during the installations.
Make sure the machine is level.
Make sure the machine is loaded evenely.
Make sure the machine is not installed on carpet or it will not be level as it needs a solid floor.
The washer-dryer leaks
Make sure the metal ring of the inlet hose is properly attached.
Make sure the detergent dispenser is not obstructed.
Make sure the drain house is inserted correctly to the drain.
The washer-dryer is not drying
Make sure the plug is correctly inserted into the power outlet.
Make sure the door is properly closed.
Make sure the dryer knob is in the correct position indicating minutes for drying.
The washer-dryer is not drying efficiently
Make sure the end of the drain hose set up correctly. Is it under water?
Make sure the drain pump is not obstructed.
Make sure the drum is not overloaded.
Make sure the cold water faucet is open.
Make sure you are using a good fabric softener.