Before purchasing a new RV washer and dryer, one of the most important questions is whether the units will fit your available space. The Splendide® WFL2500X Washer and DV1725X Dryer were designed specifically for RV, marine, and compact-space installations, offering residential-quality laundry performance while fitting into standard RV laundry closets.
In this guide, we'll review dimensions, clearance requirements, electrical specifications, venting requirements, and installation considerations for the Splendide® stackable laundry pair.
In This Guide
- WFL2500X washer dimensions
- DV1725X dryer dimensions
- Stacked installation dimensions
- Minimum cabinet opening requirements
- Electrical requirements
- Water and drain requirements
- Dryer venting requirements
- Recommended accessories
- RV installation considerations
Splendide® WFL2500X Washer Dimensions
The WFL2500X front-loading washer measures:
- Height: 33 1/8 inches
- Width: 23 1/2 inches
- Depth: 23 1/4 inches
When the washer door is fully opened, additional clearance is required in front of the unit.
Splendide® DV1725X Dryer Dimensions
The DV1725X vented dryer measures:
- Height: 33 5/8 inches
- Width: 23 1/2 inches
- Depth: 23 1/4 inches
The dryer features a reversible door and 4-inch vent connection for flexible installation options.
Stacked Washer and Dryer Dimensions
When installed using the SK04 RV Stack Kit, the combined washer and dryer assembly measures approximately:
- Height: 66 3/4 inches
- Width: 23 1/2 inches
- Stacked Depth: 24 3/8 inches
These dimensions make the stackable pair an excellent fit for many modern RV laundry closets.
Minimum Laundry Closet Opening
For proper installation and service access, Splendide® recommends a minimum opening of:
- Height: 67 1/4 inches
- Width: 24 inches
- Depth: 24 3/4 inches minimum
Additional space may be required depending on plumbing, venting, and standpipe locations.
Electrical Requirements
The WFL2500X Washer requires:
- 120V
- 60Hz
- 6 amp service
The DV1725X Dryer requires:
- 120V
- 60Hz
- 12.5 amp service
A dedicated 15-amp circuit is recommended for each appliance.
Washer Water and Drain Requirements
The washer requires:
- Water pressure between 7.5 and 145 PSI
- Minimum 1 1/4-inch standpipe
- Minimum 7 GPM drain capacity
- Air break to prevent siphoning
The standpipe should be positioned:
- Minimum 25 inches above the bottom of the washer
- Maximum 34 inches above the bottom of the washer
Dryer Venting Requirements
The DV1725X uses a vented drying system.
The exhaust should never be routed into:
- Chimneys
- Furnaces
- Cold air ducts
- Attics
- Crawl spaces
- Any other ventilation system
Acceptable venting includes rigid or flexible metallic ducting that slopes downward and away from the dryer.
Recommended Accessories
Popular accessories include:
- SK04 RV Stack Kit
- SK04T Trim Kit
- MK01 SecureFit Brackets
- PI22 Drain-A-Way Pan
- VID403A Vent Kit
- VI490D 90-Degree Dryer Vent Elbow
RV Installation Considerations
For towable RVs and marine installations, the washer and dryer should be positioned near the axle area or mid-ship location whenever possible. The units should also be properly secured to prevent movement during travel.
Frequently Asked Questions
Will the WFL2500X and DV1725X fit in my RV?
Most RV laundry closets designed for stackable units can accommodate the WFL2500X and DV1725X, but you should always compare your available opening dimensions with the recommended minimum cutout dimensions.
What stack kit is required?
The recommended stack kit is the Splendide® SK04 RV Stack Kit.
Does the DV1725X require outside venting?
Yes. The DV1725X is a vented dryer and requires proper exhaust ducting.
Can the washer and dryer run on standard RV power?
Yes. Both units are designed for 120V operation.
What is the total stacked height?
When installed together, the stackable pair measures approximately 66 3/4 inches tall.