Splendide Machine Continuously Fills and Drains Water



WD2100 & WD2000S

If your Splendide machine continuously fills and drains water it might be because the wall drainage system doesn't have a breathier pipe or that the drain hose is positioned too low which may cause siphoning. 

If you live on an upper floor of a building, there may be a problem with your drain trap. To solve this a special valve must be installed.

Check that the standpipe is at least 25" high and not more than 34" high. Make sure that no more than 6" of drain hose is inserted into the standpipe. If the problem still persists after these checks, turn the water supply OFF and call Splendide for assistance 800-356-0766.



Back to blog