How to Replace the Door Switch on a Splendide Washer-Dryer
WD2100XC / XCP (Splendide 2100XC) WDC7100XCP (Splendide 7100XC)
If you own a Splendide washer-dryer and notice issues like the door not locking properly or the machine not starting, you may need to replace the door switch. This component ensures the door is closed securely and plays a critical role in the machine's operation. Here's a step-by-step guide on how to safely replace the door switch.
Tools Needed:
- Torx screwdriver (size 15)
- Flathead screwdriver
- Pliers (optional for wire connectors)
Step 1: Power Down the Washer-Dryer
Safety first! Before starting any repair work on your washer-dryer, make sure it’s unplugged from the power source. If the unit is hardwired, you can flip the circuit breaker to ensure no power runs through the machine.
Step 2: Remove the Door
To access the door switch, you’ll need to remove the door. Using your size 15 Torx screwdriver, unscrew the two screws holding the door hinge to the washer's front panel. Be sure to hold the door securely as you remove the last screw so that it doesn’t fall or damage other parts.
Step 3: Remove the Porthole Diaphragm
The porthole diaphragm (the rubber gasket surrounding the door opening) needs to be partially removed to access the door switch. Start by using a flathead screwdriver to gently pry the edge of the diaphragm off the washer's front panel near the door switch. Be careful not to damage the rubber gasket.
You may only need to peel back enough of the diaphragm to access the door switch, but if necessary, remove it entirely by locating and removing the large spring that holds the diaphragm in place.
Step 4: Access the Door Switch
Once the diaphragm is moved out of the way, you'll see the door switch secured with two additional size 15 Torx screws. Remove these screws to free the switch from the front panel of the washer.
Gently lift the switch, and you’ll find the wire plug connected to it. Use your fingers (or pliers if needed) to carefully disconnect the wire plug from the switch.
Step 5: Replace the Door Switch
Now that the old door switch is removed, install the new one by reconnecting the wire plug first. Then, fit the new switch into place and secure it with the Torx screws.
Step 6: Reattach the Porthole Diaphragm and Door
After the switch is replaced, reattach the porthole diaphragm. Ensure the gasket is seated properly around the door opening and secured with the spring if it was removed.
Next, reattach the door by screwing it back onto the hinge. Make sure the door opens and closes smoothly and that the alignment is correct.
Step 7: Power On and Test
With the door switch replaced and everything reassembled, plug your Splendide washer-dryer back into the power source (or turn on the breaker). Run a quick cycle to ensure that the door switch works correctly and the washer functions as expected.
Final Tips:
- Check alignment: After replacing the door and switch, check that the door latches properly and seals tightly to prevent leaks.
- Inspect the diaphragm: While reattaching the diaphragm, make sure it is free of any tears or cracks. A damaged gasket can lead to leaks and should be replaced if necessary.
Replacing the door switch on a Splendide washer-dryer is a straightforward task if you follow the proper steps and handle the components carefully. Regular maintenance of your washer-dryer, like inspecting the door switch and porthole diaphragm, can help you avoid larger issues down the road.
For more detailed guides on servicing Splendide appliances, consult their technical manuals.
This post provides a hands-on guide for Splendide washer-dryer owners looking to replace their door switch. It's perfect for DIYers who want to troubleshoot and repair their appliances at home without needing professional help.